Sunroof Limit Switch Test

Sunroof Limit Switch Test

OPEN/CLOSE, TILT/CLOSE SWITCH:


1.Remove the headliner

2.Disconnect the 4P connector from the sunroof limit switch.

 

3.Check for continuity between the terminals in each switch position according to the table.

NOTE: Turn the motor by hand with the wrench.

 

OPEN SWITCH (KK, KU and KT models):


1.Remove the headliner.

2.Disconnect the 4P connector from the sunroof limit switch.

 

3.Check for continuity between the terminals in each switch position according to the table.

NOTE: Turn the motor by hand with the wrench.