CVT Driven Pulley Speed Sensor Replacement (CVT)

CVT Driven Pulley Speed Sensor Replacement

1.Remove the air cleaner housing and intake air duct.

2.Disconnect the CVT driven pulley speed sensor connector.

 

3.Remove the CVT driven pulley speed sensor.

4.Install the new CVT driven pulley speed sensor (A) with the new O-ring (B). When installing the sensor, do not allow dust or other foreign particles to enter the transmission.

5.Check the connector for rust, dirt, or oil, then connect the connector securely.

6.Install the air cleaner housing and intake air duct.