|DTC: 66, 68, 69||EPS Control Unit Internal Circuit|
|1.||Clear the DTC.|
|2.||Start the engine.|
|3.||Turn the steering wheel from lock to lock several time, and wait 10 seconds or more.|
Does the EPS indicator come on?
YES - Go to 4.
NO - The system is OK at this time.n
|4.||Stop the engine, and verify the DTC.|
Is DTC 66, 68 or 69 indicated?
YES - Check for loose EPS control unit connectors. If necessary, substitute a known-good EPS control unit and recheck.n
NO - Perform the appropriate troubleshooting for the code indicated.n