|DTC P0133(61-1):||Primary HO2S(Sensor 1) Slow Response|
|1.||Reset the ECM/PCM.|
|2.||Start the engine. Hold the engine at 3,000 rpm (min-1) with no load (in Park or neutral) until the radiator fan comes on.|
|3.||Test-drive under the following conditions:|
|4.||Check for a Temporary DTC with the scan tool.|
Is Temporary DTC P0133 indicated?
YES - Replace the Primary HO2S (Sensor 1).n
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose wires, the Primary HO2S (Sensor 1) and the ECM/ PCM.n