function ISAA2E000000000K0061BAAD08(){var i=0;this.Title=" Testing and Repairs";this.Name="SAA2E000000000K0061BAAD08";this.Width=475;this.Height=898;this.CallOut=new Array;this.CallOut[i++]=FS4(25,513,13,0,"'Arial','sans-serif'",0,"<b>&middot;</b>");this.CallOut[i++]=FS4(25,549,13,0,"'Arial','sans-serif'",0,"<b>&middot;</b>");this.CallOut[i++]=FS4(44,513,13,0,"'Arial','sans-serif'",0,"<b>Puncturing the insulation on a wire can cause poor<br>or intermittent electrical connections.</b>");this.CallOut[i++]=FS4(44,549,13,0,"'Arial','sans-serif'",0,"<b>For testing at connectors, bring the tester probe into<br>contact with the terminal from the connector side of<br>wire harness connectors in the engine compartment.<br>For female connectors, just touch lightly with<br>the tester probe and do not insert the probe.</b>");this.CallOut[i++]=FS4(1,22,13,0,"'Arial','sans-serif'",0,"<b>DIGITAL CIRCUIT TESTER<br>(Commercially available) or <br>07411-0020000</b>");this.CallOut[i++]=FS4(251,361,13,0,"'Arial','sans-serif'",0,"<b>CONTROL MODULE or<br>CONTROL UNIT</b>");this.CallOut[i++]=FS4(71,421,13,0,"'Arial','sans-serif'",0,"<b>SHARP TESTER PROBE</b>");this.CallOut[i++]=FS4(5,859,13,0,"'Arial','sans-serif'",0,"<b>WIRE HARNESS</b>");this.CallOut[i++]=FS4(16,671,13,0,"'Arial','sans-serif'",0,"<b>RUBBER SEAL</b>");this.CallOut[i++]=FS4(268,854,13,0,"'Arial','sans-serif'",0,"<b>TERMINAL</b>");this.CallOut[i++]=FS4(299,668,13,0,"'Arial','sans-serif'",0,"<b>TESTER PROBE</b>");}