| 1. | Remove the air cleaner housing. |
| 2. | Remove the camshaft sprocket. |
| 3. | Remove the rocker arm assembly. |
| 4. | Remove the air cleaner housing bracket, ground cable and harness holder mounting bolt, then remove the harness holder from the bracket. |
| 5. | Disconnect the camshaft position (CMP) (top dead center (TDC)) sensor, connector, then remove the CMP (TDC) sensor, refer to the 2002 Jazz/Fit Shop Manual. |
| 6. | Remove the camshaft thrust cover (A), then pull out the camshaft (B).
|