| 1. | Disconnect the battery negative cable from the battery. |
| 2. | Remove the intake manifold. |
| 3. | Disconnect the alternator connector (A), WHT wire (B) and harness clamp (C) from the alternator.
|
| 4. | Remove the drive belt. |
| 5. | Remove the lock bolt (A) and mounting bolt (B), then remove the alternator.
|
| 6. | Install the alternator in the reverse order of removal. |
| 7. | Adjust the drive belt tension. |
| 8. | Perform the ETCS learn procedure (with ETCS). |