| 1. | Remove the driver's side dashboard side cover. |
| 2. | Push the power mirror switch (A) out from the dashboard.
|
| 3. | Disconnect the 13P connector (B) from the switch. |
| 4. | Check for continuity between the terminals in each switch position according to the table. Mirror Switch: Defogger Switch: Retract Switch: |
| 5. | If the continuity is not as specified, replace the switch. |
| 6. | Chech for continuity between the No. 9 and No. 4 terminals. If there is no continuty, replace the bulb (C). |