Blower Unit Removal/Installation
-
-
-
Cut the plastic cross brace (A) in the glove box opening with diagonal cutters in the area (B). Retain plastic cross brace to be reinstalled later.
|
|
-
Remove the bolts, and the glove box frame (A).
|
|
-
Disconnect the connector (A) from the blower motor. Remove the clips (B).
|
|
-
Remove the self-tapping screws and the passenger's heater duct (A).
|
|
-
Remove the self-tapping screws and the mounting nuts, and pull the blower unit (A) out.
-
Install the unit in the reverse order of removal. Make sure that there is no air leakage.
|
|